RA401 ROLLER SHUTTER
Aluminium - Compact
Aluminium - Compact
PRODUCT OPTIONS AVAILABLE |
||
 |
LPC LEVEL 1 SPECIFICATION |
The LPC Level 1 Specification can include any of the RA4 Shutter Laths which include the Vision Laths. The shutter has to be electrically operated. |
 |
LPC LEVEL 2 SPECIFICATION |
The LPC Level 2 Specification can include ONLY the Solid RA4 Shutter Laths. The shutter has to be electrically operated and has security enhancements built in to reach Level 2. |
 |
LPC LEVEL 3 SPECIFICATION |
The LPC Level 3 Specification can include ONLY the Solid RA4 Shutter Laths. The shutter has to be electrically operated and has security enhancements built in to reach Level 3. |
 |
ROD CRANK OPERATION |
Shutters are raised and lowered from inside by a rod crank winding handle which hangs down vertically beneath the box and secures on a clip when not in use. |
 |
SPRING LOADED OPERATION |
For external operation the shutters can be Spring Loaded with a transverse key lock in the bottom lath. The bottom slat projects 60mm below the shutter when fully raised. |
 |
ELECTRIC OPERATION |
Motors are required on larger shutters and are optional on smaller shutters. The tubular motor fits inside the axle and draw approximately 250 watts, 3amps. Operation is by Toggle switch, Key switch or remote control. |
 |
CAVITY CLOSER AND GUIDE RAIL |
A combined Cavity Closer and Shutter Guides which are tied in with the brickwork. |
 |
RA2 FOAM FILLED ALUMINIUM LATH |
Low Security Foam Filled Aluminium Lath. Ideal for Insulation and Light Control. |
 |
RA4 SOLID LATH |
Uses a Twin Walled extruded aluminium slat. Ideal for High Security applications. |
 |
RA4 PERFORATED LATHS 18% VISION (GLAZING OPTIONAL) |
Uses a single skin extruded aluminium slat drilled with 5mm dia, holes, providing 18% vision. |
 |
RA4 PUNCHED LATHS 44% VISION (GLAZING OPTIONAL) |
Uses a single skin extruded aluminium slat with 100mm x 20mm cut outs, providing 44% vision. |
 |
BOTTOM LATH LOCK |
Included as standard with all RA401 shutters. The lock is fitted into the bottom lath, when the key is turned it shoots aluminium bars into the guide rails each side. |
 |
SOMFY TUBE MOTORS |
All our Electric Roller shutters include a High Quality Somfy motor, which include a Manufactures 5 Year parts Warranty. Available with or without a Manual Override. |
 |
TOGGLE SWITH |
Single Pole Switch to operate one shutter with an electric motor. Supplied with a surface mounted back box as standard with all electric shutters. Flush mounted back box available on request. Dual Pole Switch is available to operate two shutters next to each other. |
 |
KEY SWITCH |
Single/Dual Pole Key switch is used instead of a standard switch to deliver extra security. Also available is the Anti Tamper Key Switch, which is Tamper proof. |
FITTERS MATE CONTROLLER |
The Fitters Mate controller reduces the voltage to the Switch from 240V down to Low Voltage. Its also allows the shutter to be wired into the fire alarm. | |
 |
REMOTE CONTROL |
Fitted internally it enables shutters to be operated remotely. Can be operated by Key Fobs, Remote Key Switch, Remote Toggle Switch, Remote Keypad or Anti Tamper Key Switch. |
 |
ANTI DROP BRAKE |
To comply with the Construction Products Directive all doorway shutters require an anti fall back device when the maximum out of balance static force exceeds 200 newton's after component failure. |
 |
SAFETY EDGE |
When the rubber comes into contact with an obstruction when the door is moving in the down direction, the door stops and retracts back to release what it made contact with. |
 |
PHOTO ELECTRIC CELL |
The Photo Electric Cell is designed to check for any obstructions before the shutter opens or closes. It increases safety as it prevents the door from operating if there is a risk of someone getting injured. |
 |
MANUAL OVERRIDE |
Used as a way of manually operating motorised shutters in the event of a power failure. Various options include Fixed, Removable or Hook & Eye. |
 |
BATTERY BACKUP |
The Battery Backup has been designed to provide power for roller shutters when mains power is not available. The system can be set to provide standby power for up to 100 days. During a power failure the unit will have enough power to provide at least eight complete shutter cycles. |
 |
BOX SECTION PACKERS |
We have a large range of Steel and Aluminium Box Section packers available. Used to pack off to avoid obstructions like skirting boards, architrave, cables and pipes. |
 |
STEEL AND ALUMINIUM ANGLE |
We have a large range of Steel and Aluminium Angle available. Used to pack off to avoid obstructions and close off any gaps around the shutter. |
